UFACTORY UF850 robot with Reforge motion-performance software
Customers

Robot manufacturer

Getting more performance from the UFACTORY UF850

Vibration reduction
91.8%
Tracking-error improvement
8.6x
TCP accuracy improvement
5.7x

UFACTORY partnered with Reforge Robotics to bring motion-performance software to the UF850, compensating for vibration, dynamic tracking error, and kinematic error. UF850 models and integration code are available in the open-source UFACTORY integration repository.

Shaper: reduce vibration and settling time

Shaper modifies motion commands before execution to suppress shaking during and after fast moves — without changing the intended path.

In one validation with a 4.6 kg payload, Shaper reduced median residual vibration by 91.8%.

Shaper is especially useful for:

  • High-speed pick-and-place
  • Dispensing and adhesive application
  • Welding, laser cutting, and plasma cutting
  • Robotic 3D printing
  • Sanding, polishing, and surface finishing
  • Inspection or imaging where the tool must settle before measurement

Download UF850 Shaper models from the integration repository. The Shaper quickstart explains how to load a model and shape a trajectory.

Joint Tracker: follow the commanded path more closely

Joint Tracker uses a dynamics model to modify each command so the robot follows the intended path more accurately at speed.

UF850 Joint Tracker path-following results

At 5× speed scale, Joint Tracker reduced mean per-joint RMS tracking error from 1.507° to 0.175° and TCP error from 10.94 mm to 1.929 mm.

Joint Tracker can help improve:

  • Teleoperation and robot-learning trajectories
  • Welding and cutting toolpaths
  • Dispensing and sealing
  • Robotic 3D printing
  • Scanning and inspection

Download the UF850 Joint Tracker model from the integration repository. Follow the Joint Tracker quickstart or run the included validation test.

KineCal: improve absolute positioning accuracy

KineCal measures how a physical robot differs from its nominal geometry and generates a calibrated model to compensate.

Watch a representative video of Reforge KineCal

KineCal is designed for:

  • Bin picking
  • Machine tending and fixture loading
  • Precise placement and assembly
  • Multi-station workflows
  • Camera-guided manipulation

Get started by building your own kit for under $35 using the Make Your Kit guide, or contact us to order a laser-tracker-calibrated kit for $35 + shipping. Then follow the UF850 calibration workflow.

See what Reforge can improve on your robot

Bring one representative trajectory or error dataset. We’ll identify the relevant product, required inputs, and a bounded evaluation plan.

Book a Demo